Saltar al contenido

Products to kill Mold

antimoho casero

The mold fungus is one of the many problems of moisture that can suffer our home and for it we need to find products to kill mold and this fungus can cause problems to the facades and structures of housing, problems for our health and is one of the most unsightly things we can see.

You might be interested: Moisture on exterior walls. 👈 👈 👈

In this article on products to kill mold we will touch several points such as: What is mold, types and colors of mold, how to end the mold on the walls, tricks to remove mold from the walls, among other topics more.

You can use these anti-mold products for walls, ceilings and floors, being applicable to every surface of the house, without more than saying let’s start with this wonderful article on Products to kill mold.

Products to kill mold

What is Mold?

Mold is a type of fungus that is found outdoors, flowers in places with high percentage of humidity and low luminosity, generally in areas near the forest or the sea, are of microscopic size being impossible to see the human eye.

There are three types of mold: The first is the Alternate mold is identified as the black mold on walls, the second is the mold Cladosporium identified as the green mold on the walls and the third is the Aspergillus mold identified as the white mold but can also be dark colors. The mold stains on the wall is the most unsightly thing we can see and so we must remove the mold stains on the walls yes or yes.

You may ask yourself: How to combat mold on the walls? or How to clean the mold from the bathroom ceiling? Good for it we are going to offer you a series of solutions and mention the best Products to kill mold.

Moho en las paredes

 

Consequences of Mold

Bad smells

The mold can cause bad odors this is felt much more when the humidity is above 80%, being the most unpleasant, and it is more than clear that we must remove the mold from the wall as soon as possible and not only say it for the bad appearance it can have, the real reason is that breathing the mold and moisture can be harmful to our health, because it is a toxic fungus.

olor a humedad en casa

Poor Appearance and Unsightly

We say this because of the black, green, white and dark spots that have the mold, plus that is the most basic symptom to identify the problem and that comes with the odors of moisture and that does not mention that mold at home causes health disease.

Manchas de moho en la pared

Health Problems

The health problems is a serious indication that mold is bad for health because it is a toxic fungus and just breathe it can unblock a number of viral and respiratory diseases. The mold on walls causes diseases such as bronchitis or a sore throat, it should be mentioned that the moisture of mold causes allergic diseases, among other health problems such as for example:

  • Nasal Congestion
  • Throat irritation
  • Cough or wheezing
  • Eye irritation
  • Irritation in the pool
  • Allergies and infections
  • Lung diseases

Humedad en paredes y Salud

 

The Products to kill mold

When we know what the consequences are and how mold is produced, we go for an effective solution to eliminate mold, then we go to an establishment and we find more than 50 Products to kill mold, then we do not know which is the most effective or efficient to clean mold from walls, ceilings and floors.

So we have conducted a study and we will show you the most effective solutions to remove mold, reflected in the Products to kill mold, may not sound familiar or you’ve heard of some products but its effective is good to clean and combat the problem of mold.

Productos para eliminar el moho

 

1. Anti-Mold Detergent

The anti-mold detergent is one of the most effective Products to kill mold on the market, this product works as a fungicide cleaner ideal for removing stains of moisture and mold on the wall, with only using a small amount we can remove the mold with the help of a handkerchief or sponge, also we can find in its liquid or particulate presentation.

2. Anti-mould protector

The anti-mold protector is a transparent liquid that helps kill mold walls being very recognized for its effectiveness, this can be applied over the paint, in the case of having mold stains with a sponge clean the wall or ceiling and add the anti-mold protector and you will see how it serves to remove mold from the walls, as I told you is one of the most effective Products to kill mold on the market.

3. Antimoho Additive

The anti-mold additive is an effective solution to prevent the appearance of mold, is easy to dose, does not affect the components of the paint and is ideal for combining with any type of paint achieving the best protection for moisture condensation, may not be one of the products to eliminate moisture but if we help prevent it.

4. Anti-mould silicone

The anti-mold silicone helps us prevent the appearance of mold, you can ensure that you have ever seen black spots in the joints of the shower or tiles, well that are the mold stains that usually appear over time, for it the first thing we must remove the old silicone, use the anti-mold spray, clean and finally add the new anti-mold silicone in the joints. This product is ideally complemented with Products to kill mold.

5. Anti-Mold Spray

The anti-mold spray is also known as anti-mold fungicide because it allows us to eliminate bacteria and mold spores with only a few applications, for this is necessary the help of a sponge or a flannel, it should be noted that there is an immense amount of anti-mold spray fungicides, from different brands, presentations, characteristics and types.

On the other hand, it is recommended to use gloves and mask during its application so as not to absorb the chemicals of the anti-mold spray. It can also be used in walls, ceilings, floors, tiles, etc. and it is one of the Products to kill mold used and sold mold in the market.

6. Anti-Mold Paint

The anti-mold paint is one of the Products to kill mold that is usually used and recommended to kill and prevent future moisture problems, as it belongs to the class of thermal paints being ideal to combat moisture condensation and prevent the appearance of mold.

The good thing about this anti-humidity product is that it is used very often in anti-humidity treatments on walls because it stands out for its effectiveness, it is recommended that before its application should clean the mold on the wall with the anti-mold spray or anti-mold detergent, you may wonder how to clean walls with mold and moisture. Lines below we will show you how to use these Products to kill mold.

productos para quitar el moho

 

Home anti-mold products

We have already known the industrial products that are used to eliminate mold, so in this topic we are going to show you another alternative solution that helps us eliminate it, we are talking about homemade solutions or homemade methods to clean, remove or kill mold that are just as effective and above all it is more environmentally friendly.

Many of these home methods help us remove mold from porozas surfaces that induce the production of stains and moisture, can also be used in the anti-mold treatment on walls, without buying any industrial anti-mold product.

1. Bleach

The bleach is a product that can kill any type of mold, killing all the bacteria, fungi and spores that produces the mold, all that bacteria and fungus that makes direct contact with the bleach, disinfecting this area, also is used to clean the bathroom in general ideal for eliminating bacteria from the bathroom and kitchen, on the other hand this is used at home as one of the Products to kill mold.

How to use: In a container add 1/2 cup of bleach with 4 cups of water and then apply it to the area containing mold, or if you want you can add bleach directly to the affected area, wait about 15 minutes for it to kill the fungus and bacteria and use a flannel, brush or sponge, then soak with water. It is recommended to use gloves and a mask.

2. Borax

Borax is a white mineral that is used as a cleaning product, usually does not emit strong odors or hazardous gases, but it is also not recommended to be very exposed to this mineral. Being a natural product, borax is used to kill mold, such as insecticide, herbicide and fungicide. It is used at home as one of the Products to kill mold.

Way of Use: In a container add 1/2 cup of borax with 2 cups of water, but before applying it must clean the affected area without residues of mold spores, then apply the borax with water, wait about 15 minutes and with the help of a brush scrub the mold off the surface, clean with a mop and let the surface dry. It is recommended to use gloves and a mask.

3. White Vinegar

Vinegar is a cooking ingredient that is sometimes used to remove stains such as household utensils or stains from clothing. On the other hand, it has the property of being able to remove mold stains on interior walls, ceilings and floors. Due to its home use as one of the Products to kill mold is cheaper and easier to use.

How to use: in a bottle with spray add 1/2 cup of white vinegar with 1/2 cup of water, shake and apply to the affected area, let act for 15 minutes and with a scrub brush to remove all stains and mold wait. Being one of the best solutions to remove mold from the ceiling, walls and floors.

4. Lemon juice with white vinegar

This combination of Lemon Juice with white vinegar is to enhance the effectiveness of the home remedy anti-mould, it is clear to mention that lemon can kill bacteria and fungi, so with the white vinegar would be a more complete homemade solution as it removes stains and mold bacteria. It is also considered as a homemade method and as one of the Products to kill mold complete mold that exists.

How to use: In a spray bottle add juice of half a lemon with 1/2 cup of white vinegar, shake and apply in the affected area, let act for 15 minutes and with a scrub brush to remove stains and mold. It can be used as one of the products to clean mold on walls of cement or stone as it acts effectively.

5. Ammonia

Ammonia is an ideal bactericidal liquid to kill bacteria and fungi, similar to bleach but being much stronger in its chemical compounds, can be used to kill mold, on the other hand it is not recommended to mix ammonia with bleach (SOS), as it can products very toxic gases for health. It can be used at home as one of the Products to kill mold.

How to use: In a spray bottle add 50% ammonia and 50% water, spray on the affected area with mold and leave to act for a couple of hours, then soak with water and dry. It is recommended to leave the area to let the ammonia solution rest, essential to use gloves and plug, it is considered a very toxic household mold cleaner, but very effective at the same time.

6. Hydrogen Peroxide

Hydrogen Peroxide kills mold by being a bactericide, antifungal and antibacterial, besides it is an alternative solution to bleach, but less toxic and a little more ecological. Hydrogen Peroxide, being one of the most effective solutions, eliminates mold from wood, clothing, appliances, walls, ceilings, etc., since it can enter porous and non-porous areas of materials.

Mode of Use: In a spray bottle add 3% hydrogen peroxide and 97% water, then spray on the area with mold and let stand for 15 minutes then scrub with a brush or sponge, soak with water and dry. This is one of the most effective Products to eliminate mold we can prepare and use.

7. Boric Acid

Boric acid is a chemical compound used as an antiseptic, insecticide or flame retardant, thanks to its antibacterial properties can be used to eliminate mold, being a good home method that removes mold from walls, ceilings and floors. It is also considered as one of the most creative and efficient products to eliminate humidity.

How to use: In a spray bottle add 1 teaspoon of boric acid with 1 cup of water, shake and spray on the area with mold, let act for 15 minutes before scrubbing with a brush or sponge, then soak with water and let dry. An ideal solution to remove mold from the walls of the house.

8. Baking soda

Sodium bicarbonate is more of a natural cleaning product than an industrial anti-mold product, but it can be used as one of the products to clean up mold on walls, ceilings and floors. Compared to the traditional anti-mold products this one does not contain bad smells, but the sodium bicarbonate eliminates the bad smells of the mold and of the humidity, in addition that it can absorb up to the same humidity of the housing.

How to use: In a spray bottle add 1 tablespoon of baking soda with 1/2 liter of water, then spray on the area with mold, let act for 15 minutes before scrubbing with a brush or sponge, then soak with water and let dry. This is one of the most economical Products to eliminate mold we can find.

9. Grapefruit Seed Extract

Grapefruit seed extract is the same as Tea Tree Oil because it is a natural product, a little expensive and very effective, besides that this natural product has no smell, on the other hand has anti-fungal and antibacterial properties, this solution lasts longer compared to other methods. It is considered as a homemade method or one of the most efficient Products to kill mold on the market.

How to use: In a spray bottle add 10 drops of grapefruit seed extract with 1 cup of water, shake and spray on the affected area with mold, let stand for 10 minutes and clean with a flannel or brush, repeat this process to remove all the mold in the area, is ideal for removing mold on painted walls or to clean mold on walls with moisture.

10. Tea Tree Oil

Tea Tree Oil is the most effective solution to eliminate mold, but is the most expensive because it is a natural product, harmless to people and pets, in addition to being an anti-fungal and antibacterial product ideal for eliminating any type of bacteria and fungi in the house. It is considered as one of the most effective and expensive Products to kill mold in the market, the small bottle usually costs between 10 to 12 euros.

How to use: In a bottle add a teaspoon of Tea Tree Oil with 1 cup of water, then spray on the area with mold and let act for 15 minutes, then with a brush or a flannel scrub for a minute to remove the mold and let dry, it is not necessary to rinse with water.

antimoho casero

 

Questions about Products to kill mold

How to remove mold from walls?

To eliminate mold is very simple and we have shown more than 10 solutions to do so, we have industrial products or home solutions to eliminate mold, you can take the most ideal to eliminate the various types of mold on walls, likewise can eliminate mold on painted walls or shelled.

If you are wondering how to remove mold from interior walls? or How to remove mold from walls forever? Well to answer the first question just use homemade solutions and to eliminate mold forever, we believe that with the use of an anti-mold fungicide, Tea Tree Oil and anti-mold paint we can prevent it from appearing.

spray antimoho

How to remove mold from walls with home remedies?

Well it’s easy you have 10 home recipes that you can use, we recommend the No. 9 and 10 because its effectiveness is greater ideal for learning how to remove mold from walls, ceilings and floors. If you want you can use other Products to kill mold such as borax or lemon juice with white vinegar.

limpiar moho pared

How to remove mould from the bathroom ceiling?

To remove or clean the mold from the bathroom ceiling we can use many options such as anti-mold spray or boric acid or any of the other options shown above. This protection can be reinforced with the use of an anti-mildew paint for the roof or a liquid waterproofing so that condensation does not penetrate.

moho en el techo

How to remove mould from walls due to condensation?

Condensation is one of the moisture problems that happens very often, this usually happens when the air is not renewed and it condenses, just see stains of moisture or mold on walls by condensation, is a sign that our house is going through moisture problems, peeling paint is another key symptom.

One of the solutions for condensation mold can be anti-mold fungicides, anti-mold detergent or household methods that likewise allows us to exterminate this fungus, in addition that these solutions allow us to remove mold from the ceiling of the room or kitchen floors.

moho por condensación soluciones

How to remove mold from plaster walls?

To remove mold from a plaster wall is a little more complex than a cement wall, in the case of an unpainted plaster wall will have to remove the affected part because the plaster is a porous material and therefore the mold and penetrate more than the surface, recimienda call a professional for this case.

In the case of having mold on painted plaster wall is easier because the mold is on the surface, first sand the wall or remove the paint with a spatula, then spray one of the Products to kill mold we show you, then add the white base and paint the wall with an anti-mold paint and to reinforce we give a pass of liquid waterproofing to prevent future appearances of mold.

You might be interested: Pests of the humidities.  👈 👈 👈

How to paint a wall with mold?

You can paint a wall with mold, of course but nothing will help because the mold is still alive and will continue to reproduce, for this we must use one of the Products to kill mold we showed you earlier, these solutions will help you and teach you how to kill the mold on the walls or remove the mold from the ceiling.

Some people will ask: How do I remove the mold from the roof if I don’t have money? You can do it through home remedies such as white vinegar with lemon juice or sodium bicarbonate, with some applications and rubbed we can eliminate mold, it should be noted that the use of grapefruit seed extract is one of the best solutions for walls with mold in the field of home remedies antimould.

Moho en paredes interiores

If you liked this article on Products to kill mold give us ⭐ 5 stars ⭐, you can share this information with your friends or family, if you have any questions or suggestions write in the comments. 👇👇. And finally, if you want more information about humidities at home you can continue browsing our website.

 

Califica este artículo

 

【Products to kill mold】【Products to kill mold】【Products to kill mold】